scadaboss watches your lift stations, tanks and booster stations around the clock — live values, trends, and alarms to your phone. Here's the whole setup, start to finish.
Create your free account →Sign up with your name, email and utility/company name. Your company becomes your own private workspace — your team's stations, data and alarms are visible only to people you invite.
On the Monitoring page, press + Add Device and pick what's in the panel at your site:
Full station control + live data every few seconds. Enter the PLC serial from the controller nameplate. Best for pump stations you want to watch closely — and control remotely when that's enabled for your site.
Battery datalogger (~9-year battery, cellular built in) for sites with no power or PLC. Pick the template that matches — Lift Station, Water Tank or Booster — and the wiring guide appears right in the form. Enter the device UID from LX CONNECT. Full walkthrough: LogUp setup guide →
Every device request is reviewed. Once approved:
PLC: we issue a one-time claim code (8 characters, valid 1 hour). Type it on the station's Cloud page and the PLC fetches its own secure credentials — nothing to configure by hand, and the station reconnects itself automatically forever after.
LogUp: nothing to do at the site — data flows from the Lacroix cloud within minutes of approval.
Open 📟 Fleet on your phone (add it to your home screen) — every station on one dark screen: levels, sparklines, pump status, and plain-language station state like "pumping down · P1 LEAD" or "waiting on drawdown". Alarmed stations jump to the top. Tap any station for detail: charts with your ON/OFF setpoints drawn in, pump runtimes and starts, daily flow totals, battery life on LogUps.
Offline alarms are automatic on every device — if a station goes silent or a LogUp misses its check-in, you hear about it, no setup. On the 🔔 Alarming page add level, pressure and rate-of-change alarms with the same Hi-Hi / Hi / Lo / Lo-Lo setup you know from a local panel; live statistics show you exactly where to put the setpoints.
Notifications go to email, Pushover on your phone, or both — raise and clear, with critical alarms as high-priority pushes.
On the 👥 Team page add operators and managers — they get their own logins to the same stations, and everyone on the team receives alarm emails automatically.
Most customers go from account to live data the same day — LogUp sites in under an hour.
Create your account